Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Carrollton?
In Carrollton, a chimney liner job typically runs $2,400 to $5,800 for a full stainless reline, while a partial HeatShield resurfacing repair usually lands between $1,300 and $2,600. A full chimney rebuild, which means tearing down and reconstructing the portion above the roofline, generally starts around $6,500 and climbs past $18,000 on taller or more damaged structures. Most homes fall somewhere in the middle: a reline plus a new cap and a crown repair often comes in around $3,200 to $4,800 once the written estimate is finalized.
Those numbers hold for Carrollton specifically because the housing stock and the local climate shape the work. The city has a large share of homes built from the 1970s through the 1990s, many with original clay-tile flues that are now cracked internally, and the hot, dry summers here bake masonry crowns and mortar joints faster than a wetter climate would. That combination drives a steady demand for both relining and rebuild work.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items break down for the Carrollton market. Ranges reflect typical jobs on a single-story to two-story home with a standard wood-burning fireplace or gas insert. Final pricing is set by the written estimate after inspection, not by these ranges.
| Service / Line Item | Typical Carrollton Range |
|---|---|
| Level 2 chimney inspection (camera + report) | $150 – $350 |
| Standard chimney sweep | $150 – $280 |
| HeatShield liner resurfacing (partial) | $1,300 – $2,600 |
| Full stainless reline (DuraFlex, single-story) | $2,400 – $4,200 |
| Full stainless reline (two-story) | $3,800 – $5,800 |
| Insulated liner upgrade | Add $600 – $1,400 |
| New chimney cap (Gelco, Olympia Chimney, Famco) | $250 – $650 |
| Crown repair or rebuild | $450 – $1,600 |
| Tuckpointing / mortar joint repair | $400 – $1,200 |
| Partial rebuild (above roofline) | $6,500 – $12,000 |
| Full rebuild with new flue | $12,000 – $18,000+ |
What moves the price up or down most is the liner material and the height of the chimney. A straight run on a single-story home is the least expensive reline; a two-story chase with offsets takes more liner length, more labor, and more time. Insulated liner systems cost more than uninsulated but perform better and are often required to bring older flues up to current standards. Rebuilds swing widely because the price depends on how many courses of brick come down and whether the flue tile itself needs replacement.
What Affects Chimney Liner & Rebuild Pricing in Carrollton
Two Carrollton homes on the same street can get very different quotes. These are the factors that move the number most.
- Liner material and brand. We work with DuraFlex flexible liner systems and HeatShield resurfacing because they hold up in this climate. A hardware-store liner is cheaper upfront and often fails sooner, which ends up costing more over a decade. The material choice alone can shift a reline by $800 or more.
- Chimney height and roof pitch. Carrollton homes range from low single-story ranches to taller two-story builds. A steep roof means more setup and more careful staging, and that labor shows up in the estimate.
- Condition of the flue interior. Cracked clay tile, gaps at the joints, and offset flues all add work. A camera inspection shows exactly what’s there before we quote, so you’re not guessing.
- Damage above the roofline. Carrollton’s dry summers and the occasional hard storm crack crowns and open up mortar joints. If the top of the chimney is spalling, that often turns a reline into a rebuild.
- Water intrusion and cap failure. Missing or rusted caps let rain and animals in. Gelco and Famco cap solutions address the root cause instead of just the symptom, and fixing it early avoids a rebuild later.
- Age of the home and the original build. Many Carrollton homes from the 1970s and 1980s were built with flues that were fine for a wood fireplace but are undersized for a modern insert. Upgrading the flue to match a new appliance adds cost.
How to Save on Chimney Liner & Rebuild
There’s no way around a liner that’s cracked through, but there are real ways to keep the total down.
- Get the inspection first. A camera inspection tells you whether you need a full reline, a partial HeatShield resurfacing, or just a cap and a crown repair. Skipping that step often means paying for more than you needed.
- Fix the surrounding issues in one visit. Combining a cap, a crown repair, and a reline into a single job is cheaper than three separate service calls. We line up the work so it’s done as one project.
- Catch crown and mortar damage early. A cracked crown is a $450 to $1,600 repair. Left alone, it lets water into the brick and turns into a $6,500 rebuild. Repairs cost far less than reconstruction.
- Choose a quality liner once. A professional-grade liner from DuraFlex, HeatShield, Olympia Chimney, or Copperfield costs more than a discount substitute but avoids a repeat job in a few years. Built to last, not patched to pass.
- Ask for a written, itemized estimate. We list every line so you can see what’s driving the total and decide what to schedule now versus later.
Every estimate from us is free, and you can call (833) 946-9706 to set one up. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can a Chimney Liner Be Repaired Instead of Replaced?
Yes. When the clay flue is cracked or the mortar joints have gaps but the structure is otherwise sound, HeatShield resurfacing can restore the liner without a full replacement. It’s a specialized product most general contractors don’t stock or know how to apply, and it typically costs $1,300 to $2,600 depending on the length and condition of the flue. If the damage is widespread, a full stainless reline through a DuraFlex flexible liner system is the better answer. A camera inspection tells you which one your chimney needs. We identify what’s wrong before we recommend what to fix.
How Long Does a Chimney Rebuild Take in Carrollton?
A partial rebuild above the roofline usually takes two to four days of work, and a full rebuild with new flue tile can run four to seven days, depending on weather and how much brick comes down. Relines and resurfacing are faster: most are done in a single day. Scheduling matters in Carrollton because the summer heat slows mortar curing, so rebuild work is often planned around the shoulder seasons. The written estimate includes a rough timeline for your specific job.
Do I Need a Permit for a Chimney Rebuild in Carrollton?
Most structural chimney work requires a permit, and rebuilds almost always do. Rather than guess, ask the City of Carrollton building department what applies to your address before work starts. A permitted rebuild protects you if you sell the home. Liner repairs and resurfacing are usually treated differently from a full rebuild, so the scope matters. We’ll explain what your job involves so you know what to ask.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Carrollton in 2026?
A full stainless liner reline typically costs $2,400 to $5,800 in Carrollton, with single-story homes toward the low end and two-story chases toward the high end. HeatShield resurfacing of a partial liner runs $1,300 to $2,600. Call (833) 946-9706 for an exact quote. Estimates are free.
Is it cheaper to repair a chimney liner or replace it?
Repair is cheaper when the damage is localized: HeatShield resurfacing at $1,300 to $2,600 versus a full reline at $2,400 to $5,800. But if the clay tile is cracked through in multiple places or the flue is offset, repair won’t hold and replacement is the only durable fix. A camera inspection settles which one you need.
How much does a chimney rebuild cost in Carrollton?
A partial rebuild above the roofline runs $6,500 to $12,000, and a full rebuild with new flue tile runs $12,000 to $18,000 or more. The total depends on how many courses come down and whether the flue itself is replaced. Call (833) 946-9706 for a free written estimate.
Can a damaged chimney liner be dangerous?
Yes. A cracked or broken liner lets heat and combustion gases, including carbon monoxide, reach the framing and living space instead of venting up and out. That’s why a camera inspection matters more than a sweep alone. Never use a fireplace with a known liner breach. A trained professional should assess it before the next fire.
Can you come out today for a chimney liner estimate?
Yes, same-day estimates are often possible when you call early. We answer 24/7 at (833) 946-9706, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. The estimate itself is free, and the written price sets the final cost.
What’s Included in a Chimney Liner or Rebuild Job
A liner job isn’t just a tube dropped down the flue. We start with an inspection to see the inside of the chimney on camera, then size the liner to the appliance and the flue. For a stainless reline, a DuraFlex flexible liner is run, connected at the top and bottom, and sealed. For resurfacing, HeatShield is applied to the interior to seal cracks and rebuild the flue surface. On rebuild work, the damaged section above the roofline is removed, the flue is checked, new brick and mortar go up, and a cap from Gelco, Famco, or Olympia Chimney tops it off. A crown is formed or repaired to shed water. One specialist handles the sweep, the repair, and the inspection so you’re not coordinating three contractors.
Why Choose a Specialist for Liner and Rebuild Work
Chimney liners and rebuilds are among the more technical jobs in the trade. A general handyman can patch mortar, but sizing a liner to code, applying HeatShield correctly, and rebuilding a flue to vent properly take a specialist. We work with a professional-grade product lineup because materials matter here: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That lineup is why we can handle everything from a cap replacement to a full reline to a rebuild without handing you off. Our technicians have up to 15 years of experience, and we treat the chimney as a system, not a single part. For a broader look at what we cover across the area, see our chimney services in Carrollton or explore the full Carrollton service area.
When to Call for a Liner or Rebuild Estimate
Call when you smell smoke in the house when the fireplace is lit, when you see cracked or missing mortar above the roofline, when a cap is missing or rusted, or when you’ve just bought a home and don’t know the last time the chimney was inspected. Any of those is a reason to get a camera inspection and a written estimate before the next fire. Pricing varies by job, and the estimate is free. Call (833) 946-9706. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Written by the team at Carrollton Chimney Cleaning.
Pricing reflects the Carrollton market as of 2026. Carrollton Chimney Cleaning offers free estimates – call (833) 946-9706.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bryce Sutton"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Brian Barrett"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Latoya Dawson