Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does a Chimney Cap & Crown Cost in Carrollton?
In Carrollton, a chimney cap install typically runs $185 to $425, and a crown repair typically runs $375 to $950. Minor crown crack sealing sits at the low end, while a full crown rebuild with a proper overhang lands at the high end. A cap and crown done together on the same visit usually costs less than booking the two jobs separately, because the technician is already on the roof and set up.
A missing or failed cap is the most common cause of water getting into a chimney here. A cracked crown does the same thing more slowly. Neither is expensive to correct compared to what water damage does to a flue liner and the framing around it. Our technicians have up to 15 years of experience, we work with professional-grade materials rather than hardware-store substitutes, and we identify what’s wrong before we recommend what to fix.
Key takeaways:
- Standard single-flue cap installation: $185 to $425
- Crown crack sealing or coating: $375 to $600
- Full crown rebuild: $600 to $950, more if the flue tile or liner needs work first
- Cap plus crown on one visit: $450 to $1,200 typical
- Estimates are free and the written estimate sets the final price
Chimney Cap & Crown Cost Breakdown (2026)
These are typical installed prices for the Carrollton market. The cap figures include the cap itself and labor. Crown figures include removal of failed material, forming, and a poured or cast crown with the correct slope and overhang.
| Line item | Typical range | Notes |
|---|---|---|
| Standard single-flue cap (steel, mesh) | $185 – $300 | Most common job on a Carrollton ranch or two-story brick chimney |
| Multi-flue or custom-size cap | $300 – $425 | Larger footprint or non-standard flue configuration |
| Decorative or copper cap | $425 – $850 | Copperfield and similar quality copper caps sit at the top of this band |
| Animal guard or spark arrestor only | $150 – $275 | For chimneys that already have a cap frame worth keeping |
| Crown crack sealing or elastomeric coating | $375 – $600 | Hairline and surface cracks, crown still structurally sound |
| Partial crown rebuild | $550 – $750 | One or two sides washed out, rest of the crown intact |
| Full crown rebuild | $600 – $950 | New crown cast with slope and overhang, bonded to the flue tile |
| Crown rebuild with flue tile replacement | $950 – $1,600 | Cracked top flue tile removed and replaced before the crown goes back |
What moves the number up or down most is the condition underneath. A cap is a fixed-piece job: measure the flue, match the footprint, set and secure it. A crown is a weather-dependent masonry job, and the price tracks how much failed material has to come off before anything new can go on. A crown that’s cracking in one small area is a different job than a crown that’s separated from the flue tile and letting water track down behind it. If the inspection turns up a damaged liner, the liner repair is a separate line on the estimate and you’ll see it priced out before anything is approved.
Chimney shape matters too. Carrollton has a lot of single-story ranch homes where the cap and crown work is straightforward, and plenty of two-story homes with taller, narrower chimneys where access and setup take longer. Both get priced per job on the written estimate, not from a flat rate card.
What Affects Chimney Cap & Crown Pricing in Carrollton
- Chimney height and roof pitch. A two-story chimney with a steep roof takes more setup and more caution than a single-story ranch. That shows up in labor. It’s also the main reason we won’t quote a crown over the phone without seeing it.
- How far the crown has failed. Surface crazing is a coating job. A crown pulling away from the flue tile, holding standing water, or crumbling at the edges is a rebuild. The gap between those two is the widest swing in the whole price range.
- Flue count and footprint. A single flue takes a single cap. A chimney serving two flues, or one with an oversized crown footprint, needs a larger or custom cap and more material.
- Cap material. Galvanized steel is the budget option and will eventually rust in North Texas humidity. Stainless and copper cost more upfront and last far longer. We install Gelco, Famco, Olympia Chimney and Copperfield caps, so the material choice is yours to weigh against the price.
- Whether the liner is sound. Rebuilding a crown on top of a cracked flue tile is money spent twice. If the inspection shows liner damage, the honest sequence is liner first. We use HeatShield for liner resurfacing and DuraFlex flexible liners for full relining, which keeps that repair in the same visit rather than sending you to a second contractor.
- Access and roof condition. Old, brittle shingles near the chimney, tight side-yard access, or a chimney tucked behind a steep valley all add time. Carrollton’s mix of older established neighborhoods and newer construction means we see both ends of that.
The local climate drives how often this work comes up. Carrollton summers are long and hot, and that heat cycles a masonry crown every day from above while the flue heats it from below. Add the heavy spring and fall rain this part of North Texas gets, and a crown with a shallow slope and no overhang becomes a funnel. Water sits, works into hairline cracks, and finds its way to the flue tile. Most of the crown repairs we price here are water damage, not structural failure. A cap is the cheap half of that equation, which is why we usually price the two together.
The other local pattern worth knowing: this is a mature suburb with plenty of homes built decades ago and a steady flow of buyers moving into them. A crown that looked fine to the last owner can be past its useful life. A home inspection that flags the chimney rarely comes with a price attached, which is where a proper chimney inspection pays for itself before you commit to a repair number.
How to Save on Chimney Cap & Crown
The single biggest saving is doing the cap before the crown fails. A $185 to $425 cap keeps rain off the crown and out of the flue, and it’s the least expensive thing you can do to protect the most expensive parts of the system. Waiting until water has been getting in for a couple of seasons turns a cap job into a crown job, and sometimes into a liner job on top of that.
Beyond timing, a few practical moves keep the number down:
- Bundle the cap and crown on one visit. One trip, one setup, one estimate. The two together typically cost less than two separate appointments.
- Fix cracks while they’re still cracks. Sealing or coating a sound crown runs $375 to $600. A full rebuild starts at $600 and climbs from there. Catching it a season earlier keeps you in the lower band.
- Choose the cap material deliberately. Stainless or copper costs more than galvanized today and outlasts it by a wide margin. Paying once beats paying twice.
- Get the inspection first, not the repair. We identify what’s wrong before we recommend what to fix. If the crown is sound and only the cap is missing, you’ll hear that.
- Ask for the written estimate before work starts. Ours is free, and the written estimate sets the final price. No surprises once the technician is on the roof.
If you want a number for your chimney specifically, call (833) 946-9706 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap vs. Crown: What’s the Difference and Why Both Matter
A chimney cap is the metal hood and mesh that sits on top of the flue. A crown is the concrete or mortar slab at the top of the chimney structure itself, built with a slope so water runs off and an overhang so it drips clear of the brick. A cap protects the flue opening from rain, animals and sparks. The crown protects the masonry below it.
They fail differently, and that’s why we treat them as one system rather than two separate jobs. Your chimney is a system, and we treat it like one. A cap that’s missing or rusted through lets water straight down the flue. A crown that’s cracked lets water into the brick and the space between the flue and the chimney walls. Both routes end at the same place, which is a damaged liner and water staining on the ceiling or firebox. Whichever one fails first, the other becomes the second problem.
When we look at a chimney, we check the cap, the crown, the flue tile and the liner together. Sometimes the answer is a cap and nothing else. Sometimes it’s a crown rebuild plus a cap. On older Carrollton chimneys it’s often a crown rebuild, a new cap, and a HeatShield resurfacing of the liner, all quoted as separate lines so you can see exactly what each part costs and decide what to do now versus later.
What Happens When You Call
You describe what you’re seeing: a cap that’s gone, water stains, a draft that’s gotten worse, an odor from the fireplace, or a chimney the home inspector flagged. We book a visit, and a technician comes out to look at the cap, crown, flue and liner together.
Then you get a written estimate with the work itemized. Cap and crown priced separately. Any liner repair priced separately. You approve what you want done. You don’t get a pressure pitch, and nothing happens until you’ve seen the number in writing.
Most cap installations are a single visit. Crown work depends on the condition and the weather, and we’ll tell you honestly at the estimate stage how the job will go. If a repair needs a follow-up visit, you’ll know before you approve it. We don’t leave a job half-finished and call it done.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Carrollton?
A standard single-flue chimney cap in Carrollton typically costs $185 to $425 installed, including the cap and labor. Multi-flue and custom-size caps run $300 to $425, and decorative copper caps run $425 to $850. Call (833) 946-9706 for an exact quote – estimates are free.
How much does chimney crown repair cost in Carrollton?
Crown repair in Carrollton typically runs $375 to $950 depending on how far the crown has failed. Sealing or coating a sound crown with surface cracks sits at $375 to $600. A full crown rebuild runs $600 to $950, and more if the top flue tile has to be replaced first. Call (833) 946-9706 for a written estimate – the estimate sets the final price.
Is it cheaper to repair a chimney crown or replace it?
Repair is cheaper when the crown is still structurally sound and only has surface cracks. Coating or sealing runs $375 to $600 versus $600 to $950 for a rebuild. But if the crown has pulled away from the flue tile, is holding water, or is crumbling at the edges, a patch is money wasted. We identify what’s wrong before we recommend what to fix. Call (833) 946-9706 for a free estimate.
Do I really need both a chimney cap and a crown repair?
If both are failing, yes. A cap keeps rain out of the flue. The crown keeps rain out of the masonry. Fixing one and leaving the other leaves the chimney open to the same water damage from a different direction. Priced together on one visit, the pair typically runs $450 to $1,200, which is less than two separate appointments. Call (833) 946-9706 for a free estimate.
Can you install a chimney cap the same day?
Often yes, when the cap is a standard size and we’ve inspected the chimney first. Custom, multi-flue and copper caps take longer to source. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday, so a call today can usually get a visit on the schedule quickly. Call (833) 946-9706 to book.
Why Choose Carrollton Chimney Cleaning
We handle sweeping, repair and inspection as one service relationship, so a cap and crown job doesn’t turn into a hunt for a second contractor when the inspection turns up a liner problem. Our repair work runs on a professional-grade lineup: HeatShield for liner resurfacing, DuraFlex for full relining, and Gelco, Famco, Olympia Chimney and Copperfield for caps and covers. These are the materials that set the price, and they’re built to last, not patched to pass.
Whether you’re in a home near downtown Carrollton, in the established neighborhoods around Josey Ranch, or in the newer development on the city’s north side, the process is the same: look first, quote in writing, do the work correctly. Our technicians have up to 15 years of experience, and every job gets a written estimate before anything starts.
If you haven’t had the chimney looked at in over a year, recently bought the house, or noticed a draft, odor, or water stain, this is the moment to get the cap and crown checked. Call (833) 946-9706 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A full breakdown of everything we handle is on our chimney cleaning services page, and homeowners across Carrollton can book any of it with one call.
Written by the team at Carrollton Chimney Cleaning.
Pricing reflects the Carrollton market as of 2026. Carrollton Chimney Cleaning offers free estimates – call (833) 946-9706.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bryce Sutton"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Brian Barrett"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Latoya Dawson